Modular walls 28mm wargaming terrain - make your own fortress! | Part of The Fortress set

These modular miniature wall pieces can be used as wargaming terrain in several fantasy and medieval games, dioramas or as terrain for RPG systems. The modular walls are part of a modular set called The Fortress and with the other pieces can be used to build a modular fortress.

The last picture contains the large gatehouse & and tower modules listed seperately.

All miniatures are intended and designed for 28mm scale in The Fortress set.

Most wall pieces have 3 plastic connector slots & 6 magnets slots on each side.

Each wall piece will be supplied with either 3 plastic connectors or 12 4x1mm magnets, depending on your choise, so you will always be able to connect each piece.

Piece descriptions:

Wall short:
This is a basic wall piece for the fort.
Dimensions:

• Width: 7.5 cm (2.95 inches) 
• Depth: 7.89 cm (3.11 inches) 
• Height: 12.9 cm (5.08 inches)

Wall long:
This is a basic wall for the fort that is double the length of a short piece.
Dimensions:

• Width: 15 cm (5.91 inches)
• Depth: 7.89 cm (3.11 inches
• Height: 12.9 cm (5.08 inches)

Wall short – portal:
This is a wall piece that has an arched doorway and acts as a small gatehouse. Optionally, a door or a portcullis can be slid from the top when needed, which are listed separately so you can pick the option you want or both to change them up, or leave the doorway open depending on your vision of the perfect fortress.
Dimensions:

• Width: 7.5 cm (2.95 inches)
• Depth: 7.89 cm (3.11 inches) 
• Height: 12.9 cm (5.08 inches)

portal w/ portcullis:
Same as above but with a portcullis piece included. See below for details on portcullis.

portal w/ door:
Same as above but with a door piece included. See below for details on door piece.

Wall short – drain:
This is a basic wall piece for the fort that has a drain hole covered by a grating going through the bottom of the wall piece.
Dimensions:

• Width: 7.5 cm (2.95 inches)
• Depth: 7.89 cm (3.11 inches
• Height: 12.9 cm (5.08 inches)

Wall short – ruined:
This is a wall piece that has connectors on its left side and has collapsed on its right side.
Dimensions: Width: 7.89 cm (3.11 inches) — Depth: 10 cm (3.94 inches) — Height: 12.9 cm (5.08 inches)

Wall short – ruin inverted:
This is a wall piece that has connectors on its right side and has collapsed on its left side.
Dimensions: Width: 7.89 cm (3.11 inches) — Depth: 10 cm (3.94 inches) — Height: 12.9 cm (5.08 inches)

Wall end:
This piece has connectors on its left side and is used when you want to cleanly end your wall without completely surrounding an area with wall blocks.
Dimensions: Width: 7.98 cm (3.14 inches) — Depth: 2.15 cm (0.85 inches) — Height: 12.9 cm (5.08 inches)

Wall end inverted:
This piece has connectors on its right side and is used when you want to cleanly end your wall without completely surrounding an area with wall blocks.
Dimensions: Width: 7.98 cm (3.14 inches) — Depth: 2.15 cm (0.85 inches) — Height: 12.9 cm (5.08 inches)

Door for portal:
This piece looks like a pair of wooden doors and slides from the top to cover the entrance in the wall short – portal piece, obscuring visibility.
Dimensions: Width: 5.93 cm (2.33 inches) — Depth: 0.45 cm (0.18 inches) — Height: 9.77 cm (3.85 inches)

Portcullis for portal:
This portcullis slides from the top to cover the entrance in the wall short – portal piece, leaving visibility through the gaps.
Dimensions: Width: 5.83 cm (2.30 inches) — Depth: 0.44 cm (0.17 inches) — Height: 9.84 cm (3.87 inches)

Stairs:
These stairs can be used to add paths from the ground level to the walls of your fort.
Dimensions: Width: 5 cm (1.97 inches) — Depth: 10 cm (3.94 inches) — Height: 9.38 cm (3.69 inches)

Wall corner outside:
This wall corner piece makes a 90-degree corner on the outside and is used when you want to encompass an area with walls.
Dimensions: Width: 7.5 cm (2.95 inches) — Depth: 10.7 cm (4.21 inches) — Height: 12.9 cm (5.08 inches)

Wall corner inside:
This wall corner piece makes a 90-degree corner on the inside and is used, for example, when you want to add some irregularity to the shape of your fortress.
Dimensions: Width: 8.3 cm (3.27 inches) — Depth: 8.3 cm (3.27 inches) — Height: 12.9 cm (5.08 inches)

These are part of The Fortress set designed by Dani Amengual and printed by me under a commercial license.
You can find pictures of the set painted and other additional information from the designer of this set here:
https://www.kickstarter.com/projects/daniamengual/the-fortress-stl-files

Safety & Manufacturer Information
Handmade by: CelestialForge
Address: Kuutamokatu 4 A 25
Made in Finland

⚠️ Not a toy. This item is intended for adult hobbyists, collectors, or for use in tabletop games such as RPGs or wargames.
Not suitable for children under 14 years. Contains small parts — choking hazard.